EasyManua.ls Logo

EasyThreed X4 - Unload Filament

Default Icon
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
return.
(3),Print.
From the screen you can choose” print from SD” and enter inside the TF card, Choose the
gcode file inside the TF card And confirm . Please be patient and wait about 5
minutes, for the nozzle and hotbed to heat up, the printer starts printing
when the temperature rises to set value.
(4)Pause/Restore
during printing, choose”Pause print” press button , then printing paused.
If need to continue print , choose”Resume print” press button , the printer goes back to print .
(5) Stop Print
If you want to stop print during printing , choose”Stop print” press button, the machine will
stop printing, then printing cancelled.