EasyWalker MINI - Using the Bumper Bar; Five-Point Safety Harness

EN
EN - 7
Press the lever under the seat and move the back of the seang to the
required posion (image 33). Support the back of the seang for your
child’s comfort. When in place, release the lever. The seang is now in
posion.
Storage basket
Under the seat of the easywalker MINI stroller is a storage basket. This
storage basket can be used for groceries up to 5 kg / 11 lbs (image 39).
You can take the basket o, using the Velcro straps.
Bumper bar
To aach the bumper bar to the easywalker MINI stroller, place the
bumper bar on the frame (image 48) and close the clips on the le and
the right side (image 49). The bumper bar is now aached. Make sure the
bumper bar is aached properly.
To detach the bumper bar, open the clips on both sides and take the
bumper bar o the frame.
To have an easy access to your child the easywalker MINI stroller bumper
bar can be swung open on one side. When the bumper bar is aached to
the frame you can open a clip on one side of the bumper bar. The bumper
bar can now be swung open (image 50). The bumper bar can be swung
open on both sides.
Design set
WARNING! Always use the easywalker MINI stroller in combinaon with
the easywalker MINI stroller design set.
Five-point safety harness
WARNING! Always use the restraint system.
WARNING! Always use the crotch strap in combinaon with the waist
belt and shoulder belts when carrying your child in the seat.
Aaching the ve-point safety harness:
Aach the shoulder straps by opening the rear of the seang (image
34), put the metal end of each shoulder strap through one of the