Need help?Do you have a question about the Eaton 350 Series and is the answer not in the manual?
General| Brand | Eaton |
|---|---|
| Model | 350 Series |
| Category | Water Pump |
| Language | English |
Advanced, closed-circuit, axial piston pump for medium duty hydrostatic circuits.
Large input shaft diameter for high through-put power and auxiliary hydraulic needs.
Identifies key physical features of the pump assembly, including controls, shaft, and ports.
Details available control methods like servo, electro-proportional, and hydraulic remote.
Lists design elements such as symmetrical bolt pattern, polyacrylate seals, and bearing types.
Outlines industries and equipment where the pump is commonly used, e.g., construction, agriculture.
Key performance data including continuous pressure, rated pressure, displacement, and input speed.
Defines the base model code 'AED' and the dual servo controlled variable displacement axial piston pump.
Details front pump displacement, mounting, shaft, valve plate, and relief settings.
Specifies rear pump displacement, valve plate, and relief settings.
Covers charge pump displacement, relief settings, and control assembly types.
Describes main port types, drain ports, auxiliary ports, bypass valves, sensors, and special features.
Detailed dimensions and port layout for manual servo pump configuration, including port labels.
Dimensions and port layout for solenoid controlled pump configuration, including connector details.
Performance data for the solenoid control, including hysteresis, response time, and current.
Dimensions and port layout for hydraulic remote controlled pump configuration, noting pilot pressure ports.
Dimensions of the magnetic speed sensor and its mating connector components.
To Next Page