Need help?Do you have a question about the Eaton 5SC 500 and is the answer not in the manual?
General| Output Power | 300 W |
|---|---|
| Form Factor | Tower |
| Input Frequency | 50/60 Hz |
| Output Frequency | 50/60 Hz |
| Input Voltage | 230 VAC |
| Output Voltage | 230 VAC |
| Battery Type | Sealed Lead-Acid (SLA) |
| Topology | Line Interactive |
| Outlets | 4 x IEC 320 C13 |
| Communication | USB |
| Typical Recharge Time | 4-6 hours |
| Operating Temperature | 0 to 40°C |
| Storage Temperature | -15 to 45°C |
| Humidity | 0-95% non-condensing |
| Safety Approvals | CE, EN 62040-1-1, EN 62040-2, EN 60950-1 |
Guidelines and precautions for handling the UPS system and its batteries safely.
Essential safety measures and conditions for operating and installing the UPS system.
Important considerations for handling, installation, and battery replacement.
Steps to power on the UPS and ensure it is operating correctly and protecting loads.
Lists common operation status faults, their causes, and recommended actions.
Provides safety recommendations and step-by-step instructions for replacing the UPS battery module.
To Next Page
