Eaton 600 A 15 kV class push-OP Installation And Operation Instruction

ii CBC-8000 capacitor bank control installation and operation instructions MN916001EN—October 2018 Eaton.com/cooperpowerseries
Radio modem installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Before placing the control into service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
TESTING
Testing an installed control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Removing the control from service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Removing a socket mount control from service . . . . . . . . . . . . . . . . . . . 38
Removing a pole mount control from service . . . . . . . . . . . . . . . . . . . . . 39
Removing a panel mount control from service . . . . . . . . . . . . . . . . . . . . 39
APPROVED SENSOR MANUFACTURERS
Line post sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Neutral current sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
ADDITIONAL INFORMATION
Replacement kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Factory-authorized service centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Eaton 600 A 15 kV class push-OP Specifications

General

Brand	Eaton
Model	600 A 15 kV class push-OP
Category	Cables and connectors
Language	English