Eaton 600 Ampere Deadbreak Junction 25 kV Class - User Manual

Eaton 600 Ampere Deadbreak Junction 25 kV Class

8 pages

To Next Page

To Next Page

Loading...

600 Ampere Deadbreak Junction 15 & 25 kV and 35 kV Class

Installation Instructions

COOPER POWER

SERIES

Junctions

MN650044EN

Effective May 2017

Supersedes January 1987 (S600-22-1)

Table of Contents

Questions and Answers:

K
Kathryn CampbellAug 11, 2025
What to do if Eaton Industrial Electrical unit will not close?
- C
  Christopher EscobarAug 11, 2025
  If your Eaton Industrial Electrical unit won't close, ensure the yellow manual operating handle is fully up in the CLOSED position. Also, verify that all cables are properly connected. Finally, check the condition of the battery located in the control cabinet.
G
Gerald MoonAug 26, 2025
What to do if Eaton Industrial Electrical unit will not open?
- E
  Elizabeth SmithAug 26, 2025
  If your Eaton Industrial Electrical unit won't open, first check that all cables are properly connected. Also, check the condition of the battery located in the control cabinet.

Eaton 600 Ampere Deadbreak Junction 25 kV Class Specifications

General

Brand	Eaton
Model	600 Ampere Deadbreak Junction 25 kV Class
Category	Cables and connectors
Language	English

Related product manuals

Preview: Eaton 600 A T-OP II

Eaton 600 A T-OP II

Preview: Eaton 600 A PUSH-OP

Eaton 600 A PUSH-OP

Preview: Eaton 600 A 35 kV class

Eaton 600 A 35 kV class

Preview: Eaton 600 A 15 kV class

Eaton 600 A 15 kV class

Eaton 600 A 15 kV class push-OP

Preview: Eaton 600 A 35 kV class PUSH-OP

Eaton 600 A 35 kV class PUSH-OP

Eaton 600 A 25 kV class PUSH-OP

Preview: Eaton NZM1 Series

Eaton NZM1 Series

Eaton COOPER POWER SERIES

Eaton X-Limiter Hinge-Mount

Preview: Eaton GridAdvisor Series II

Eaton GridAdvisor Series II