If any problems are encountered during the operational
check, contact the Voltage Regulator Support group at
(886)975-7347 (International calls at (262)896-2591 and
e-mail at RES-VRSupport@Eaton.com).
DANGER
Explosion Hazard. Voltage regulators are subject to high
circulating current during bypass switching. Refer to
Service Information MN225003EN Voltage Regulator
CL-7 Series Control Installation, Operation, and
Maintenance Instructions for information on the CRA
Control, and refer to the instruction manual supplied by
the voltage regulator manufacturer for specific safety
procedures for bypass switching. Failure to comply will
result in severe personal injury or death. VR-T214.0
23CL-7 control replacement assembly installation instructions and service information MN225017EN October 2016