Eaton 600 A 15 kV class push-OP Assembly And Installation Instructions

Table 3. KNOVA59-3 Substation Assembly and Installation Parts
Item Description Part Number Quantity
1 Support Angle VCS10011860001 5
2 Upper post, left 6A00378601 2
3 Upper post, right 6A00378602 2
4 Lower post, right RA01152001 2
5 Lower post, left RA01152002 2
6 Cross brace, short R001533002 4
7 Cross brace, long R001533008 4
8 Control mounting strap KM00001366X000 1
9 Hex-head cap screw, 1/2-13 X 1.25” 730115150125A 32
10 Hex-head cap screw, 1/2-13 X 1.50” 730115150150A 16
11 Hex-head cap screw, 1/2-13 X 1.75” 730115150175A 10
12 Hex-head cap screw, 1/2-13 X 2.5” 730115150250A 2
13 Hex nut, 1/2-13 880215113050A 48
14 Spring lockwasher, 1/2-med 900815050000A 60
15 Washer 900215050000A 2
16 Spacer KA20280061 12
17 Caplug bolt cover .5” KA20730057 2
18 Caplug retainer, .5” KA20730058 2
19 Mounting bracket 6A00432602 2
20 Anti-seize compound KA23640017 3
6 SUBSTATION FRAME KNOVA59-1 AND KNOVA59-3 ASSEMBLY AND INSTALLATION INSTRUCTIONS MN280043EN January 2016

Eaton 600 A 15 kV class push-OP Specifications

General

Brand	Eaton
Model	600 A 15 kV class push-OP
Category	Cables and connectors
Language	English