Eaton AT2P User Manual

5. Factory Settings cont.
AM/PM switch-over
Switch clock is in current operating mode
1. Press h and keep pressed
2. - Press Res once
- all segments are displayed
- after approx. 1 second the following appears:
AM, 12.00 and 3 (Wednesday)
Operating mode AU is active = works setting
3. Release h
4. Select operating mode as required, see 6.2.1 or 6.2.2 or 6.2.3
5. Set the current time of day and weekday, see 6.1
6. Changing settings
Note:
You can exit/conclude any adjustments, changes you make at any time with
the key
6.1 Time and day of the week
Res.
Clear
Prog. 1 2
Day h m
+1h

1 2 3 4 5 6 7
18:30
+1h
Press the key once
Set the time:
With the h key—hours
With the m key—minutes
Note for weekly time switch:
If the Operating mode
No = no change
- see 6.2.3
Was selected, the day of the
week must now be set.
With the Day 1-Monday
Key select: 2-Tuesday
3-Wednesday
:
7-Sunday
Res.
Clear
Prog. 1 2
Day h m
+1h
Res.
Clear
Prog. 1 2
Day h m
+1h

1 2 3 4 5 6 7
18:30
+1h
Press the key once
The input is ended.
Digital Quartz Timer Product Code: AT2P

Eaton AT2P Specifications

General

Brand	Eaton
Model	AT2P
Category	Timer
Language	English