IB02602004E For more information visit: www.eaton.com
Instructional Literature
Effective: May 2008 Page 3
Instructions for the FP-6000 Protective Relay
1.4 Referenced Documents
IMPACC Communications Standard, IL 17384.
IEEE Standard Electrical Power System Device Function
Numbers and Contact Designations, # C37.2-1996, ISBN 0-7381-
0732-8 Standard IEEE Device Numbers.
1.5 Commercial and Trademarks
1.6 FP-6000 Hardware Resources and Description
The FP-6000 has four current measuring inputs, four voltage
measuring inputs, eight contact inputs, seven contact output
relays, communications and a front panel user interface.
Based upon the firmware loaded into the flash memory of the
FP-6000 and the customer settings entered manually through the
front panel or through the RS-232 port using the PowerPort
program, the microprocessor observes inputs, sets outputs and
stores data for user retrieval.
Figure 1. FP-6000 Resources.
Acrobat™ Adobe
®
Corporation
Explorer™ Microsoft
®
Corporation
IMPACC™ Eaton
INCOM™ Eaton
IEEE™ Institute of Electrical and Electronic
Engineers
PowerNet™ Eaton
PowerPort™ Eaton
Windows
®
Microsoft Corporation
6
6
Fiber
Optic
To Next Page
Loading...
