Eaton Cutler-Hammer FP-6000 Series - Page 45

IB02602004E For more information visit: www.eaton.com
Instructional Literature
Effective: May 2008 Page 45
Instructions for the FP-6000 Protective Relay
4.6.2.3 Logging
“Logging” Display:
4.6.2.4 Contact Input CFG
“ Input CFG” Display:
Current Demand
Interval (m): 15
Data Logger
Mode: Cont.
Trigger: Auto
Interval (s): 900
Value 1: IA
Value 2:IB
Value 3: IC
Value 4: IX
Value 5: VA
Value 6: VB
Value 7: VC
Value 8: VX
Event Log Enable
I Pickup: Yes
V Pickup: No
Freq Pickup: No
PF Pickup: No
Unbal Pickup: No
SYSALM Pickup: No
Power Pickup: No
Logic Pickup: No
RTD Pickup: No
Var Pickup: No
Cin1: No
Cin3: No
Cin4: No
Cin5: No
Cin6:No
Cin7:No
Cin8: No
Comm: No
Power Demand
Window: Fixed
Interval (m): 15
Waveform Capture
Records: 16*16
PreTrigger: 2
OSC Trigger
OSC Trig Enable
TRIP 2: Overwrite
dV/dl: Disable
Logic LG6:Overwrite
Cntrl PB: Overwrite
Comm: Overwrite
Logging
Current Demand
Power Demand
Event Log Enable
Data Logger
Waveform Capture
Cin2: No
TRIP 1: Locked
Contact Input CFG
Cin1: 52a
Cin2:52b
Cin3: BFI
Cin4: Bkr Trouble
Cin5: Remote Open
Cin6:RemoteClose
Cin7: Remote Reset
Cin8: user defined
BFI- “Breaker Fail Initiate”
Input Config
Contact Input CFG
RTD Config
“RTD Config” Display:
RTD Config
RTD1 Disable
RTD2 Disable
RTDx Disable
RTD11 Disable
Note: x 3 to 10