Need help?Do you have a question about the Eaton EEO-17F112C and is the answer not in the manual?
General| Number of Microphones | 1 |
|---|---|
| Connectivity | Wired |
| Type | Electret condenser |
| Sensitivity | -38 dB ±3 dB |
| Impedance | 2.2 kΩ |
| Operating Voltage | 1.5 V DC |
| Current Consumption | 0.5 mA |
Details PTO configurations for various manual transmission models.
Details PTO configurations for Medium-Duty Manual transmissions, including gear and spline info.
Lists PTO configurations for RT Series transmissions, including 8-bolt/6-bolt info and torque limits.
Provides PTO configuration details for RT Vocational transmissions, including model numbers and specifications.
Details PTO configurations for RT Performance transmissions, including gear info and torque limits.
Diagrams illustrating PTO wiring configurations and connections.
Wiring diagram for J1939 PTO installation with hardwire confirmation.
Wiring diagram for J1939 PTO installation, showing OEM ECU and TCM communication.
Wiring diagram for PTO with confirmation switched to chassis ground.
Wiring diagram for PTO with confirmation switched to power.
Operating instructions for stationary and mobile countershaft/split shaft PTOs on AutoShift models.
Operational procedures for UltraShift countershaft PTOs, for stationary and mobile use.
Operational steps for UltraShift PLUS/FA countershaft and split shaft PTOs.
Instructions for operating Eaton Hybrid countershaft PTOs in stationary, mobile, and ePTO modes.
Operating instructions for Endurant countershaft PTOs in stationary and mobile applications.
Guide for relocating inertia brakes on UltraShift transmissions, including medium and heavy-duty types.
Step-by-step instructions for installing inertia brake on the right side of medium-duty transmissions.
Instructions for relocating inertia brakes on Heavy-Duty Gen 2 transmissions from 8-bolt to 6-bolt opening.
Instructions for relocating inertia brakes on Heavy-Duty Gen 3 transmissions from 8-bolt to 6-bolt opening.
To Next Page