Zero 88 FLX S Lighting Console – User Manual Page 15 of 47
Speed, Size, Offset and Rotation Encoders
When you press effect, the effect parameters are assigned
to the control wheels.
If you apply different effects to different parameters of the
fixtures (e.g. Rainbow and Circle) you can use the Speed
wheel to control the speed of all the effects in one go.
When multiple effect palettes are being used together (for
example, Circle, Chaser, and Rainbow, Each palette can
be adjusted separately by pressing Effect to cycle
through the displays on the encoders. The first press
displays the global Speed, Size, Offset and Rotation of the
overall effect. Pressing Effect again will then display
Speed, Size, Offset and Rotation for just the first effect.
Pressing “Effect” again will page to the second effect, and
so on. Once the last effect has been reached, pressing
“Effect” again will return to the global settings.
Rotation cannot be performed on a per parameter basis,
and can only be applied to the Pan and Tilt parameters
together. Therefore the Rotation parameter can be
adjusted via the control wheel, but is not displayed in the
Effects Window.
When applying one of the standard Intensity, Colour, Iris or
Focus effects, the base value of the parameter is
automatically changed to 50% to allow the effect to work
correctly. For these effects the size parameter is set to
100% as the default.
Apart from the effects specified above the default values of
the effect parameters for the standard effects are Speed =
25, Size = 20, Offset = 0, Rotation = 0.
Effect parameters are not automatically fanned across
fixtures. Should fanning of an effect parameter be required,
use the Offset buttons along the top of the Effect window.
To Next Page
Loading...
