Zero 88 FLX S Lighting Console – User Manual Page 20 of 47
playback, they will move to the first cue they are used
in. When disabled, they the fixtures go dark for the last
time in the playback, they will not move.
Fade Time
The time with which FLX S fades the attributes that
move on dark.
Delay Time
The time the FLX S waits after a fixture reaches
blackout before move on dark kicks in.
Don’t Move Colour / Beamshape / Position / Effect
This option allows you to disable a specific attribute
from moving in dark across the whole playback. By
default, only “Don’t Move Effect” should be enabled.
Playback Setup window – Advanced tab
To Next Page
Loading...
