2022.10.7
© 2022 Eaton Cummins Automated Transmission Technologies. All rights reserved.
107
TRSM0940 Removal and Installation | Reverse Switch
Reverse Switch
Special Instructions
The Reverse Switch is a normally open ball switch. When
the transmission is shifted into Reverse, a ramp on the
Reverse Shift Yoke contacts and raises a pin. The pin
depresses the ball on the switch, which closes the switch
contact, allowing current to flow through the switch and
light up the vehicle backup lights.
Special Tools
None
Component Identification
1. Reverse Switch
2. Gasket
3. Actuating Pin
To Next Page
Loading...