186
© 2022 Eaton Cummins Automated Transmission Technologies. All rights reserved.
2022.10.7
MHP/MXP/VHP/VXP Range Cylinder | Disassembly and Assembly  TRSM0940
MHP/MXP/VHP/VXP Range Cylinder 
Special Instructions
On 9-series UltraShift PLUS transmissions the Auxiliary 
section requires R&R prior to Range Cylinder removal. 
Damage to internal components will result if Auxiliary Sec-
tion is not properly removed prior to Cylinder removal. 
During installation, apply Eaton® Lubricant or equivalent to 
Shift Cylinder Assembly and insert valve O-Rings so a film 
covers the entire surface of each O-Ring.
Special Tools
Typical Service Tools
Component Identification
1. Hex Flange Head Screw
2. O-Rings