2022.10.7
© 2022 Eaton Cummins Automated Transmission Technologies. All rights reserved.
109
TRSM0940 Removal and Installation | Reverse Switch
Reverse Switch Installation
1. Insert the Reverse Pin in the Reverse Switch bore. (The
Reverse Pin is longer than the Neutral Pin.)
2. Install the gasket on the switch.
3. Install the Reverse Switch. Torque to 15–20 lb-ft
(20–27 N•m).
4. Connect the OEM wiring connector, making sure the
locking tab engages properly.
To Next Page
Loading...