2022.10.7
© 2022 Eaton Cummins Automated Transmission Technologies. All rights reserved.
145
TRSM0940 Removal and Installation | Main Shaft Speed Sensor
Main Shaft Speed Sensor Removal
1. Disconnect the Transmission Harness from the Main
Shaft Speed Sensor pigtail.
2. Using a 3/8” socket, remove the bolt from the retaining
clip.
3. The clip will not remove from the speed sensor.
Remove the Main Shaft Speed Sensor, with O-ring,
from the rear of the Shift Bar Housing.
To Next Page
Loading...