2022.10.7
© 2022 Eaton Cummins Automated Transmission Technologies. All rights reserved.
227
TRSM0940 Disassembly and Assembly | Main Case Main Shaft with Low Force Gearing Disassembly
11. Remove the 2nd–3rd Gear Sliding Clutch.
12. Remove the 4th no-burn washer and 3rd Gear.
13. Remove the 5th flat no-burn washer from the Main
Shaft.
14. Remove 4th Gear (5th for direct drive) from the Main
Shaft.
To Next Page
Loading...