2022.10.7
© 2022 Eaton Cummins Automated Transmission Technologies. All rights reserved.
25
TRSM0940 Auxiliary Section Service Procedures | LAS/VAS Auxiliary Section Removal and Disassembly
Range Synchronizer Assembly
1. Install the Sliding Clutch on the Blocker Pins with the
recessed side up.
2. Install the three springs into the bores of the High
Range Synchronizer Ring.
3. Place the High Range Synchronizer Ring over the
Blocker Pins of the Low Range Synchronizer, seating
the springs against the pins.
To Next Page
Loading...