194
© 2022 Eaton Cummins Automated Transmission Technologies. All rights reserved.
2022.10.7
MHP/MXP/VHP/VXP Splitter Cylinder | Disassembly and Assembly TRSM0940
Splitter Cylinder Removal
1. Ensure transmission is drained of oil.
2. Remove retaining cap screws from the Splitter Cylinder
Cover
3. Remove cover and gasket
4. Remove 3/4” nut on the Splitter Yoke Bar.
5. Remove the Splitter Cylinder Housing from the rear of
the Auxiliary Case Housing
To Next Page
Loading...