HMi Series Instruction Leaflet
EATON CORPORATION www.eaton.com 18
MODEL HMI06CE HMI06CU HMI08CE HMI10CE
Safety Approval
IP65 / NEMA 4X / CE / UL / cUL / C-Tick
(Waterproof for
front panel)
Operation Voltage DC 0% ~ + ase use i su +24V (-1 15%) (Ple solated power pply)
(Note 4)
Power
Consumption
(Note 5
3.0W 14W 7.2W 15W
)
Voltage Endurance
AC500V for 1 minute
(between charging (DC24 terminal) and FG terminals)
Operation Temp. 3 2°F (0°C ~ ) 2°F ~ 12 50°C
Storage Temp. -4°F ) ~ 140°F (-20°C ~ +60°C
Ambient Humidity
10% ~ 90% RH [0 ~ 40°C], 10% ~ 55% RH [41 ~ 50°C]
Pollution Degree 2
Shock 30G @ 11ms
Vibration Resistance
IEC 61131-2 Compliant
5Hz f≦ ＜9Hz = Co ccasional: 3.5mm ntinuous: 1.75mm / O
9Hz f 150Hz = C / Occasional: 1.0g≦≦ ontinuous: 0.5g
X, es Y, Z directions for 10 tim
Backup Battery 3V lithium battery CR2032 x 1 / Battery life: 5 years
It depen about
Backup Battery Life
ds on the temperature used and the conditions of usage,
3 years or more at 25oC.
Buzzer Multi-Tone Frequency (2K ~ 4K Hz) / 85dB
Dimensions
(W) x (H) x (D) in Inches
(mm)
7.25 x 5.67 x 1.85
(184.1 x 144.1 x 47)
9.57 x 7.01 x
2.06
(243.1 x 178.1 x
52.4)
11.70 x 8.74 x
2.01
(297.1 x 222.1
x 51.1)
Panel Cutout
(W) x (H) in Inches (mm)
6.79 x 5.21
(172.4 x 132.4)
9.11 x 6.55
(231.4 x 166.4)
11.2 28 3 x 8.
(285.2 x 210.2)
Weight in Lbs. (kg) 1.69 (.768) 1.48 (.670) 2.5 7) 2 (1.14 3. ) 79 (1.721
NIT Rating 100 cd/m
2
200 cd/m
2
400 cd/m
2
330 cd/m
2
NOTE
1) The half-life of backlight is defined as original g redu hen th
driving current is supplied to HMi. The life of LED backlight shown is an estimated value under 25 C
normal temperature and humidity conditions.
2) Pro m memory is used for recipes.
cal power consumed by HMi only without
mal operation, it is recommended to
value of the power consumption.
luminance bein ced by 50% w e maximum
o
gra
3) USB Host port can provide up to 5V/ 500mA of power.
4) Please use isolated power supply (not applicable for HMI08CE and HMI10CE).
cates the electri5) The value of the power consumption indi
connecting to any peripheral devices. In order to ensure the nor
use a power supply which the capacity is 1.5 ~2 times the
6) A total of 125K Bytes of memory is shared for History and Alarms.
7) For further details, please visit the Eaton website www.eaton.com/electrical.
To Next Page
Loading...
Need help?
General
