To Next PageTo Next Page
Need help?Do you have a question about the Eaton Cutler-Hammer Durant PRESIDENT Series and is the answer not in the manual?
General| Brand | Eaton |
|---|---|
| Model | Cutler-Hammer Durant PRESIDENT Series |
| Category | Control Unit |
| Language | English |
Details the limited warranty period, exclusions, and voiding conditions for defects.
Describes the six-digit, three-preset, bi-directional count control's outputs and memory.
Details the display, keyboard, rear terminals, and serial communication capabilities.
Specifies voltage, impedance, current, and response times for count inputs.
Covers transistor output characteristics, actuation, unlatch, and reverse modes.
Explains add/subtract, directional, inhibit, quadrature, and doubled quadrature modes.
Explains sequential output activation and five methods to turn outputs off.
Identifies all terminal functions for power, inputs, outputs, and communications.
Details specific terminal functions from #25 to #36 for power, serial data, and ground.
Step-by-step guide for attaching the unit to a panel using provided hardware.
Diagram and instructions for connecting 115 VAC power to the unit.
Diagram and instructions for connecting 230 VAC power to the unit.
Diagram illustrating how to connect a 12 VDC power supply or battery.
Shows wiring for standard count inputs using various sensor types.
Illustrates wiring for quadrature encoders to enable directional counting.
Demonstrates wiring for encoders with directional control input.
Illustrates wiring for external switches to reset the counter.
Shows connections for serial communication with external devices.
Details the display, LEDs, and the purpose of each keyboard key.
Lists function codes for unlatch, latch, preset lock, and output unlatch operations.
Step-by-step guide to changing function codes and parameters.
Explains how scale factors compensate for wear, stretch, or unit conversions.
Step-by-step guide for setting the scale factor value.
Explains methods for calculating scale factors for different application types.
Provides common problem areas like wiring, function codes, and sensor installation.
Lists problems, possible causes, and remedies for common issues.
Continues the table of common problems, their causes, and solutions.
