Eaton CEAG 3-PM-IO-INV User Manual

CEAG 3-PM-IO-INV Modul invertiert
CEAG 3-PM-IO-INV Module inverse
Montage- und Betriebsanleitung
Mounting and Operating Instructions
Zielgruppe: Elektrofachkraft gem. EN 50110-1
Target group: Qualified electricans in accordance with EN 50110-1

Eaton CEAG 3-PM-IO-INV Specifications

General

Brand	Eaton
Model	CEAG 3-PM-IO-INV
Category	Control Unit
Language	English

Summary

Conformity with Standards

Description and Scope of Application

Technical Data

Installation Guidelines

Assembly and Location

Principle of Operation

Addressing the Module

Module Connections (Fig. 1)

Shows the wiring diagram for the CEAG 3-PM-IO-INV module connections.

Address Switch Configuration (Fig. 2)

Illustrates the address switches on the module front panel for setting module address.

Address Mapping Table

Table mapping address switch settings to module addresses (1-25).

Module Connection Diagram (Fig. 3)

Wiring diagram showing module connection to ZB-S and RS485 bus.

Servicing and Maintenance

RS485 Bus Structure (Fig. 4)

Diagram illustrating the RS485 bus structure and topology for the modules.

Disposal and Recycling

General Safety Instructions