Eaton CEAG DLS/3PH-BUS-Module-inverse User Manual

CEAG DLS/3PH-BUS-Modul-invertiert
CEAG DLS/3PH-BUS-Module-inverse
Montage- und Betriebsanleitung
Mounting and Operating Instructions
Zielgruppe: Elektrofachkraft
Target group: Skilled electricians
Verwendungszweck: Notbeleuchtung, nicht für privaten Gebrauch
Intended Application: Emergency Lighting, not suitable for private use

Eaton CEAG DLS/3PH-BUS-Module-inverse Specifications

General

Brand	Eaton
Model	CEAG DLS/3PH-BUS-Module-inverse
Category	Control Unit
Language	English

Summary

Safety and Compliance

Safety Instructions

General safety instructions for device operation and maintenance.

Standards Compliance

Details conformity with relevant EU directives and EN standards.

Technical and Operational Details

Technical Data

Presents key technical specifications of the module.

Description and Scope of Application

Explains the module's function as a switch monitor and 3-phase monitor.

Installation

Guidance on installation procedures and safety regulations.

Module Operation and Setup

Assembly

Guidance on selecting the installation location based on construction standards.

Principle of Operation

Details the module's input channels, mode switching, and LED indicators.

Addressing and Bus Structure

Addressing

Procedure for setting the module address using code switches.

Bus Structure

Explains the RS485 bus topology and termination requirements.

Maintenance and Disposal

Servicing / Maintenance

Guidelines for maintenance, servicing, and checking of electrical apparatus.

Disposal / Recycling

Instructions for disposing of defective devices and batteries.