Eaton MET - User Manual

20 pages

To Next Page

To Next Page

Loading...

Type MET electronic recloser control tester

operating instructions

COOPER POWER

SERIES

Reclosers

MN280067EN

Effective July 2017

Supersedes February 2001 (S280-76-1)

Table of Contents

Questions and Answers:

L
lisawilliamsAug 10, 2025
What to do if Eaton Industrial Electrical unit will not close?
- N
  Nicholas LawrenceAug 10, 2025
  If your Eaton Industrial Electrical unit won't close, ensure the yellow manual operating handle is fully up in the CLOSED position. Also, verify that all cables are properly connected. Finally, check the condition of the battery located in the control cabinet.
S
shawnmartinezAug 25, 2025
What to do if Eaton Industrial Electrical unit will not open?
- L
  Lindsay KramerAug 25, 2025
  If your Eaton Industrial Electrical unit won't open, first check that all cables are properly connected. Also, check the condition of the battery located in the control cabinet.

Eaton MET Specifications

General

Brand	Eaton
Model	MET
Category	Cables and connectors
Language	English

Related product manuals

Eaton X-Limiter Hinge-Mount

Preview: Eaton NR

Preview: Eaton KA349WE

Preview: Eaton NZM1 Series

Eaton NZM1 Series

Preview: Eaton 600 A PUSH-OP

Eaton 600 A PUSH-OP

Eaton 200 A 25 kV class

Preview: Eaton 600 A 15 kV class

Eaton 600 A 15 kV class

Eaton 600 A 25 kV class PUSH-OP

Eaton 600 A 15 kV class push-OP

Preview: Eaton 600 A 35 kV class PUSH-OP

Eaton 600 A 35 kV class PUSH-OP

Companion II back-up current-limiting fuse

200 A Fused Loadbreak Elbow Connector Replacement Fuse