Need help?Do you have a question about the Eaton MTL5521 and is the answer not in the manual?
General| Mounting | DIN Rail |
|---|---|
| Location of Switch/Proximity Detector | Hazardous Area |
| Number of Channels | 1 |
| Connection | Screw Terminals |
| Function | Enables the use of a switch or proximity detector in a hazardous area |
| Output Voltage | 24V DC |
| Isolation Voltage | 250V AC |
| Temperature Range | -20°C to +60°C |
| Input Compatibility | NAMUR proximity detectors and mechanical switches |
| Supply Voltage | 20V to 35V DC |
| Certification | ATEX, IECEx |
| Output | Solid State Relay |
To Next Page
