Need help?Do you have a question about the Eaton MTL5523 and is the answer not in the manual?
General| Location of switches/proximity detectors | Hazardous area |
|---|---|
| Supply voltage | 20 to 35 V DC |
| Relay contact rating | Not applicable |
| Operating temperature | -20 to +60 °C |
| Protection | IP20 |
| Mounting | DIN rail |
| LED indicators | Power |
| Hazardous-area inputs | 2-wire proximity switches or detectors |
| Humidity | 5 to 95% RH (non-condensing) |
| Hazardous Area Certification | ATEX, IECEx |
| Function | 2-channel intrinsically safe switch/proximity detector interface |
To Next Page
