36
10 Available protection settings
PXR TRIP UNITS FOR POWER DEFENSE MOLDED CASE CIRCUIT BREAKERS MN012007EN March 2019 www.eaton.com
10.2.2 PDG2 PXR10 settings (LSI)
Frame 60 A 100 A 150 A 225 A All All 60 A 100 A 150 A 225 A
Profile Long delay Short delay Instantaneous
Dial Ir (A) SD profile Ii (x In)
Setting Pickup Ir (amps)
Time (s)
at 6x (Ir)
Pickup (Isd)
Isd =nx (lr)
Time (tsd)
tsd (s) Pickup li = nx (In)
A
15 32 50 80 10 2.0 0.150 2 2 2 2
B
16 35 60 90 10 2.0 0.300 3 3 3 3
C
20 40 63 100 10 2.0 I
2
t 4 4 4 4
D
25 50 70 110 10 4.0 0.150 5 5 5 5
E
30 60 80 125 10 4.0 I
2
t 6 6 6 6
F
35 63 90 150 10 6.0 0.150 8 7 8 7
G
40 70 100 160 10 6.0 0.300 10 8 10 8
H
45 80 110 175 10 10.0 0.150 12 9 12 9
J
50 90 125 200 10 2.0-10.0 0.05 to 0.30 15 10 13 9
K
60 100 150 225 10 OFF - 18.3 11 14 9.3
Configurable using PXPM software Instantaneous override
1100A 2100A
10.2.3 PDG2 PXR10 – Motor protection settings
Frame 60 A 100 A 150 A 200 A All 60 A 100 A 150 A 200 A All
Profile Overload Short delay
Dial FLA le (A) Trip profile Isd (nxIe) PXPM
Setting Pickup Ie (full load amps)
Trip class
at 6x (Ie)
Phase
unbal. % Pickup lsd = nx (Ie) tsd (s)
A 15 32 50 70 5
No
3 3 3 3
Instantaneous,
0.15s, 0.30s
B 16 35 60 80 10 4 4 4 4
C 20 40 63 90 15 5 5 5 5
D 25 50 70 100 20 6 6 6 6
E 30 60 80 110 30 7 7 7 7
F 35 63 90 125 5
Yes
5 to 35 %
1 to 200 sec
8 8 8 8
G 40 70 100 150 10 10 10 10 10
H 45 80 110 160 15 11 11 11 11
J 50 90 125 175 20 12 12 12 12
K 60 100 150 200 30 13 13 13 13
Configurable using PXPM software Instantaneous override:
1100 A 2100 A
Pickup (Isd) limited by Max
Instantaneous