Eaton QD5 - User Manual

60 pages

To Next Page

To Next Page

Loading...

QD5 Quik-Drive voltage regulator tap-changer manual

COOPER POWER

SERIES

Voltage Regulators

MN225012EN

Effective March 2016

Supersedes S225-12-2 February 2013

Table of Contents

Questions and Answers:

C
Cory VaughanAug 10, 2025
What to do if Eaton Industrial Electrical unit will not close?
- D
  dmartinezAug 10, 2025
  If your Eaton Industrial Electrical unit won't close, ensure the yellow manual operating handle is fully up in the CLOSED position. Also, verify that all cables are properly connected. Finally, check the condition of the battery located in the control cabinet.
R
Robert LopezAug 26, 2025
What to do if Eaton Industrial Electrical unit will not open?
- M
  Manuel RobertsAug 26, 2025
  If your Eaton Industrial Electrical unit won't open, first check that all cables are properly connected. Also, check the condition of the battery located in the control cabinet.

Eaton QD5 Specifications

General

Category	Cables and connectors
Type	Quick Disconnect
Series	QD5
Voltage Rating	600 V
Operating Temperature	-40°C to 105°C

Related product manuals

Preview: Eaton NZM1 Series

Eaton NZM1 Series

Preview: Eaton 600 A PUSH-OP

Eaton 600 A PUSH-OP

Eaton 200 A 25 kV class

Preview: Eaton 600 A 15 kV class

Eaton 600 A 15 kV class

Preview: Eaton 200 A 15 kV class

Eaton 200 A 15 kV class

Eaton COOPER POWER SERIES

Preview: Eaton 600 A 35 kV class PUSH-OP

Eaton 600 A 35 kV class PUSH-OP

Eaton 600 A 25 kV class PUSH-OP

Preview: 200 A 35 kV class LE series

200 A 35 kV class LE series

Tandem ELF Current-Limiting Dropout Fuse

Companion II back-up current-limiting fuse

200 A Fused Loadbreak Elbow Connector Replacement Fuse