Transmission appearance may differ, procedure is the same.
6
Range Cylinder Assembly
How to Disassemble the Synchronizer Assembly
Special Instructions
Place the synchronizer assembly on a clean, flat
surface. Cover the synchronizer assembly with a shop
rag to prevent losing the three (3) springs under
pressure from the HI range synchronizer pin locations.
Special Tools
Shop rag
To Disassemble
1. Place the larger LO range synchronizer ring on
the bench.
2. Grab both sides of the HI range synchronizer and
pull.
3. From the synchronizer ring LO range pins,
remove the sliding clutch.
A/07-4
A/07-5
3
2
1
To Next Page
Loading...
