Transmission appearance may differ, procedure is the same.
General Information
1
Section 2: General Information
How to Use This Manual 3
Model Designation 5
Lubrication
Maintain Proper Oil Level 6
Draining Oil 7
Refilling 7
Flush Procedure 8
Maintenance Interval Chart 9
Recommended Lubricant Chart 9
Transmission Operating Angles 10
Operating Temperatures with Oil Coolers 11
Power Flow
Torque Converter Mode: LO Range 12
Torque Converter Mode: Lockup Mode 14
Auxiliary Section: HI Range 15
Timing
Front Section 16
Auxiliary Section 17
Tool Reference 18
Preventive Maintenance 19
Checks Before Transmission Removal 20
Checks with Drive Line Dropped 21
Checks With Universal Joint Companion Flange or Yoke Removed 21
To Next Page
Loading...
