14
Transmission appearance may differ, procedure is the same.
Lube System
How to Remove the Lube Supply Hose for the Power Synchronizer
Special Instructions
Before removing the lube hose, label or record its
location.
Special Tools
Typical service mechanic tools
To Remove
1. Disconnect the lube hose from the power
synchronizer.
2. To ease in removal, remove the capscrew and
clamp holding the hose to the auxiliary section.
3. Disconnect the lube supply line connected to the
converter housing.
4. Inspect the fitting and connector, remove if
damaged.
5. Inspect the oil restrictor behind the connector,
remove if damaged.
H/49-7
H/43-5
3
1
2
To Next Page
Loading...
