Menu Items
Description
This section describes Main Window menu items not described elsewhere in this helpfile.
• File > Exit Closes DX Navigator and all open Device Windows.
• View > Toolbar Hides and reveals the DX Navigator Toolbar for quick access to
the following menu items:
Menu Commands
File New, Open, Save
Edit Cut, Copy, Paste
Help DX Navigator Help
• Tools > Units Selects which unit format to select for distance and temperature
parameters. The Units setting does not currently affect any DX
Navigator 1.0 parameters.
[SI] Selects SI units (meters, Celsius).
[US] Selects US units (feet, Fahrenheit).
• Tools > PEQ Format Selects which format to use when displaying parametric
EQ bandwidth.
[Q] Displays bandwidth in Q (quality factor).
[BW] Displays bandwidth in fractional octaves [BW =
log(F2/F1)/log2].
• Help > About Lists the installed version of DX Navigator software. See
Firmware Version
for more information on obtaining the firmware
version of hardware devices.
Device Window - Overview
Overview
DX1208 parameters and controls are accessed through a DX1208 Device Window. The
Device Window groups related parameters and controls together and displays them on
different tabs which appear (roughly) in the order of signal flow through the unit. From left to
right the tabs are: Input, Priorities, Automix, Output, DX Link, Logic IO, Remotes, and Settings.
Each tab with its controls and parameters is described in its own section of the helpfile. The
DX1208 Device Window with the Input tab selected is shown below.
20
To Next Page
Loading...
Need help?
General
