EAW KF695z User Manual

SPECIFICATIONS KF695z
FEATURES
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 info@eaw.com www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. KF695z/2 pp October 2001 Printed in USA
• Compact Virtual Array™ three-way system
• Vented, LF horn-loaded MF/HF (90° x 45° coverage pattern)
• 15-in LF,10-in MF, 3-in voice coil/1.4-in exit HF
• Switchable powering: Tri-amp or Bi-amp
(passive LF/MF)
• For portable use or permanent installation
A 3-way full range system in a vented trapezoidal enclosure.
Includes a 15-in woofer, vented, a horn-loaded 10-in
midrange cone and a 1.4-in exit compression driver on a 90°
x 45° constant directivity horn. Powering mode is switchable:
bi-amplified (passive LF/MF crossover) or tri-amplified.
The KF695z Virtual Array™ system’s true 3-way design dra-
matically improves the quality of vocal reproduction while its
cone-driven midrange horn extends pattern control into the
lower octaves. Universal suspension hardware (flytrack with
integral 3/8"-16 mounting point) supports permanent or
portable applications. Six year warranty.
Applications include:
Concert Tours
Band PA Ballroom Events
Corporate Events Convention Centers
Large Houses of Worship Live Music Club
DESCRIPTION
APPLICATION
PERFORMANCE
PHYSICAL
Calculated Maximum Output (dB SPL @ 1m)
Bi-amped LF/MF Peak 134.5
LF Peak 134.5
MF Peak 141.0
HF Peak 138.0
Bi-amped LF/MF Long Term 128.5
LF Long Term 128.5
MF Long Term 135.0
HF Long Term 132.0
Nominal Coverage Angle, -6 dB Points (degrees)
Horizontal 90
Vertical 45
LF Subsystem 1x 15-in, vented
MF Subsystem 1x 10-in horn-loaded cone
HF Subsystem 1x 1.4-in exit compression driver
on constant directivity horn
Configuration 3-way, full fange
Powering Switchable: bi-amplified (passive
LF/MF crossover) or tri-amplified
Controls (switches, knobs) Powering mode switch
Cabinet Type (shape) Trapezoidal
Enclosure Materials Baltic birch plywood
Finish Wear-resistant textured black
paint
Connectors 2x Neutrik NL4 Speakon
2x Neutrik NL8 Speakon
Suspension Hardware (6) 3-position flytracks with
integral 3/8”-16 threaded mount
ing points (3 each top and bottom)
Grille Powder coated perforated steel,
foam backed
Frequency Response (Hz)
±3 db 65 Hz to 17 kHz
-10 dB 50 Hz
Axial Sensitivity (dB SPL, 1 Watt @1m)
Bi-amped LF/MF 100
LF 100
MF 109
HF 110
Impedance (Ohms)
Bi-amped LF/MF 8
LF 8
MF 8
HF 8
Power Handling, (Watts Continuous)
Bi-amped LF/MF 700
LF 700
MF 400
HF 160
Recommended High-Pass Frequency
24 dB/Octave 50 Hz

EAW KF695z Specifications

General

Brand	EAW
Model	KF695z
Category	Speaker System
Language	English

Summary

KF695z System Overview

Key Features

Highlights of the KF695z three-way system, including virtual array, horn-loaded MF/HF, and switchable powering.

System Description

Details on the KF695z as a 3-way full range system with a vented trapezoidal enclosure and specific driver configurations.

Applications

Identifies typical use cases for the KF695z system, such as concert tours and corporate events.

Performance Specifications

Frequency Response & Sensitivity

Details on the system's frequency range, SPL output, and axial sensitivity across different configurations.

Impedance & Power Handling

Specifies the electrical impedance and continuous power handling for each driver section.

High-Pass Frequency

Recommended high-pass filter setting for optimal system operation and protection.

Physical Characteristics

Configuration & Powering

Describes the system's driver configuration, powering modes, and controls.

Construction & Materials

Details on cabinet type, enclosure materials, finish, connectors, and suspension hardware.

Dimensional Drawings

Dimension Details

Illustrations and measurements for the KF695z system, including overall dimensions and mounting points.

A&E Specifications

System Components & Performance

Detailed specifications for LF, MF, and HF transducers, including frequency response, SPL, and power handling.

Enclosure & Connectivity

Specifications for the trapezoidal enclosure, materials, finish, input connectors, and suspension system.