EAW SM200iH User Manual

SPECIFICATIONS SM200iH
DESCRIPTION
APPLICATION
PERFORMANCE
PHYSICAL
One Main Street, Whitinsville, MA 01588 508 234 6 158 To ll Free 800 9 92 5013 FAX 508 234 8 251 info@eaw.com www.eaw.com
EAW products are continually improved. All specications are therefore subject to change without notice. SM200iH Rev (2) April 2007 Printed in USA
A 2-way switchable (passive/bi-amp) full range system in a
vented low prole stage monitor enclosure. Includes a 12-in
woofer and a 2-in exit compression driver on a Wave Guide
Plate™. Powering mode is switchable: passive (LF/HF
crossover) or bi-amplied. Available in mirror-imaged right
and left versions.
The Wave Guide Plate eliminates horn throat distortion for
natural vocal reproduction. Switch allows pasive or biamp
operation. Dual NL4 connectors facilitate “daisy chaining”
multiple monitors. Six year warranty.
Applications include:
Band PA Concert Tours
Corporate Events Large Theaters
Large Houses of Worship Live Music Clubs
Frequency Response (Hz)
±3 db 75 Hz to 18 kHz
-10 dB 63 Hz
Axial Sensitivity (dB SPL, 1 Watt @1m)
Full Range 94
Bi-amped LF 94
Bi-amped HF 101
Impedance (Ohms)
Full Range 4
Bi-amped LF 4
Bi-amped HF 4
Power Handling (Watts, Continuous)
Full Range Passive 500
Bi-amped LF 500
Bi-amped HF 200
Recommended High-Pass Frequency
24 dB/Octave 58 Hz
Calculated Maximum Output (dB SPL @ 1m)
Full Range Peak 127.0
Bi-amped LF Peak 127.0
Bi-amped HF Peak 130.0
Full Range Long Term 121.0
Bi-amped LF Long Term 121.0
Bi-amped HF Long Term 124.0
Nominal Coverage Angle, -6 dB Points (degrees)
Conical 90
LF Subsystem 1x 12-in. vented
HF Subsystem 1x 2-in exit compression driver
on Wave Guide Plate™
Conguration 2-way, full range oor monitor
Powering Switchable: full range (passive
LF/HF crossover) or bi-amplied
Controls (switches, knobs) Powering mode switch
Cabinet Type (shape) Dual angle stage monitor/40° or
15°
Enclosure Materials Baltic birch plywood
Finish Black catalyzed polyurethane
Connectors 2x Neutrik NL4 Speakon
Grille Vinyl coated perforated steel,
foam backed
Dimensions Inches Millimeters
Height (face) 14.7 373.1
Width 22.4 568.3
Depth 9.8 247.7
Minimum Stage Height 10.9 277.6
Floor Angle(s) 40° or 15°
smargoliKsdnuoPsthgieW
Net Weight 58.0 26.4
Shipping Weight 72.0 32.8

EAW SM200iH Specifications

General

Operating Mode	Passive
Nominal Impedance	8 ohms
Power Handling	400W continuous, 1600W peak
Frequency Response	60Hz - 18kHz
Sensitivity	98dB
Enclosure Material	15mm plywood
Configuration	2-way
Max SPL	130 dB (Peak)

Summary

Product Description and Application

Description

Details the 2-way switchable full range system, its enclosure, and powering modes.

Application

Outlines typical uses for the system and highlights its features like horn throat distortion elimination.

Performance Specifications

Frequency Response and Sensitivity

Specifies frequency range, axial sensitivity (dB SPL, 1W@1m) for different modes.

Impedance and Power Handling

Details nominal impedance in Ohms and continuous power handling in Watts.

Output Capabilities

Covers recommended high-pass frequency and calculated maximum output levels.

Coverage Angle

Defines the nominal coverage angle in degrees for the system.

Physical Specifications

Component and Configuration Details

Describes LF/HF subsystems, system configuration, powering, and controls.

Cabinet, Materials, and Connectors

Details cabinet type, enclosure materials, finish, connectors, and grille.

Dimensions and Weight

Lists physical dimensions, weights, minimum stage height, and floor angles.

Dimensional Drawing

Front, Top, and Bottom Views

Provides detailed measurements for the front, top, and bottom of the enclosure.

Side Views and Details

Shows detailed side views (left and right) with specific measurement points.

A&E Specifications

System Description

Describes the two-way full range system, LF/HF transducers, and waveguide plate.

Performance Criteria

Details frequency response, sensitivity, power handling, and impedance for passive/bi-amp modes.

Enclosure and Construction

Outlines enclosure shape, materials, finish, connectors, and grille construction.