1
ASG Tech Note: Connecting and Communicating with UX8800
This tech note will help you understand how to connect and communicate with EAW
UX8800 Digital Processor
Accessories that ship with your UX8800
• CAT 5 Crossover cable 7 ft/ 2.1 m
• IEC Power cable 6 ft/ 2 m with Nema 15-3 ac mains plug for 115V / 120V
• IEC Power cable 6 ft/ 2 m with Schuko type ac mains plug for 220V / 240V
If any of these items were not included in your package please contact EAW @ 800-992-5013
1. Please read the manual
2. Downloading the latest version of EAWPilot control
software and UX8800 Greyboxes from the EAW website
www.eaw.com/downloads
3. Setting up network IP addresses
4. Verify firmware version and update if needed by
downloading Firmware Updater from the EAW website
www.eaw.com/downloads
5. Connecting your UX8800 to EAW Pilot control software
To Next Page
Need help?
General
