- 45 -
A
•
Technical data
•
Technical data:
•
Power supply: 400V/50Hz/3~, 230V/60Hz/3~
•
Cutting length: 720 mm
•
Cutting height: 80 mm
•
Table depth: 720 mm
•
Sound level EN 13023: 72 dB (A)
•
Minimum space requirement
(width x depth x height)
1305/2100
1
mm x 1500/1600
1
mm x 1355 mm
•
Clamping pressure: min. 250 daN,
max 2000 daN
•
Weight: 613 kg, 620 kg
1
•
Capacity of hydraulic oil: 1,5 l
HLPD, viscosity 46 mm
2
/ sec. to DIN 51562.
Used oil must be disposed of at the authorised
place.
1
with side tables
The exact technical specifications can be
found on the technical specifications sticker (A)
on the machine. A wiring diagram is found in
the electrical switch box.
To claim under guarantee, the machine must still
carry its original identification label.
Safety light beam
•
Total reaction time: 101 ms
•
Resolution 14 mm/minimum distance: 370 mm
•
Resolution 30 mm/minimum distance: 480 mm
•
Resolution 40 mm/minimum distance: 468 mm
Ambient operating temperature 10 °C - 60 °C
Air humidity (not condensating) 15 % - 95 %
To Next Page
Loading...
