Need help?Do you have a question about the EBA 550LT and is the answer not in the manual?
Please read operating instructions and observe safety precautions. Manual must always be available.
Children must not operate the machine. Keep the machine out of reach of children.
Do not reach beneath the blade. Keep hands clear of the cutting path.
Never leave the blade unattended. Transport only with protection.
Do not cut hard or splintering materials. Use for paper only.
Machine designed for one-man operation. Disconnect from mains before service.
Operate only with guards and panels securely fitted. Protect power cable.
Switch off when not in use. Ensure blade is covered by pressing bar.
Machine is mobile. Align with water level and adjust screws.
Plug the machine into the socket. Check voltage and frequency.
Ensure safety devices function. Understand instructions before use.
Steps to start the machine, set measurements, and use controls.
Using cutting line indicators and positioning paper correctly.
How to use the clamp plate and air table for material handling.
Adjusting clamping pressure and understanding automatic clamp movement.
Activating a cut and procedures for stopping or interrupting it.
Detailed diagram and list of all machine controls and indicators.
Cutting to specified dimensions manually or via programmed settings.
Performing multiple cuts and programming automatic paper ejection.
Creating, editing, saving, and managing cutting programs.
Choose, change, insert, and delete program steps.
Program multiple cuts, cancel programs, and manage dimensions.
Tracking and resetting the number of cuts performed.
Follow steps to safely remove and install the blade.
Steps to replace the cutting stick for optimal cutting quality.
Mount blade with tool, tighten screws, perform cutting test for depth adjustment.
Check hydraulic oil level, pump, and pressure. Change oil periodically.
Details for lubricating moving parts with specific oils and greases.
Troubleshooting steps for power, blade lock, and fuses.
Issues with measurement, oil pressure, or clamp position.
Problems with last sheet cut, cutting depth, or cutting stick. Contact service.
List of optional blades, cutting sticks, and tools.
Power, dimensions, weight, cutting capacity, and environmental data.
EC Declaration of Conformity and applicable standards.
To Next Page
General
