- 8 -
EBA 550 • EBA 550 LT
A
B
A
B
Protect mains cable against heat, oil and
sharp edges!
Standard machines are factory-set as follows:
• Voltage 230 V (120 V) 1 phase
• Frequency 50 Hz (60 Hz).
•
Safety precautions
•
All components which could endanger the
operator are covered by a guard (B)!
Do not operate the machine without the
following safety devices:
•
Front safety guard (A)
•
Panels, tightly screwed (B).
The dangerous cutting movement is
safeguarded by a movable guard (A) and a
safety two-handed control system (B)!
To Next Page
Loading...
