EBA 550LT - Technical Data; Machine Specifications

- 42 -
EBA 550 • EBA 550 LT
A
• Technical data •
Technical Data
Power supply: 230 V / 50 Hz / 8,5A / 1~
120 V / 60 Hz / 12A / 1~
Leakage current: < 3,5mA
Power cord gauge: min. 1,5mm
2
(230V)
Power cord gauge: AWG 12 (20A)
(120V)
Cutting length: 550 mm
Cutting height: 95 mm
Table depth: 570 mm
Sound level EN 13023 : < 70 dB(A)
Minimum space requirement
(width x depth x height)
without side tables (mm): 960 x 1400 x 1370
with side tables (mm): 1520 x 1400 x 1370
Clamping pressure: 200 daN bis 1100 daN
Weight without side tables: 305 kg
Capacity of hydraulic oil: 7 l
Aral Vitam DE 46 to DIN 51562.
Used oil must be disposed of at the
authorised place.
Ambient operating temperature: 10 °C - 60 °C
Air humidity (not condensating): 15 % - 95 %
The exact technical specifications can be found
on the technical specifications sticker (A) on the
machine. To claim under guarantee, the machine
must still carry its original identification label.
A wiring diagram is found in the electrical
switch box.
Safety guard
Release the control system:
Space between hood and table <20 mm
Subject to alteration without notice.