Ebac Powerpac User Manual

Explains how the dehumidifier can improve home health and reduce damp conditions, benefiting allergy and asthma sufferers.

Ensure plastic wrapping from the dehumidifier is disposed of safely and away from children.

Key steps for efficient operation including mains connection, clearance, and filter cleaning.

Advice on placing the unit to manage condensation on cold surfaces and avoid heat sources.

Details the meaning of indicator lights for water levels, faults, and boost time settings on the control panel.

Explains how to select operating modes like Max, Smart, and Boost for different needs and conditions.

Details how to adjust fan speed and indicates when the fan is operational for performance tuning.

Steps for initial setup, including standing the unit upright, ensuring clearance, and connecting to power.

Advice to use MAX mode initially until moisture is reduced, then switch to Smart mode for normal use.

Max mode provides maximum operation, indicated by three solid raindrops, for initial moisture reduction.

Smart mode is energy-efficient, automatically adjusting operation based on home and weather conditions.

Boost mode overrides settings for 2, 4, or 8 hours to maximize extraction before returning to previous settings.

The fan can be set to quiet or high speeds to adjust performance and noise levels as needed.

Explains the red light indicator when the water container is full and how to empty it.

Instructions for removing, cleaning, and refitting the air filter to maintain unit efficiency.

Guidance on removing, rinsing, and refitting the water filter to protect the pump from damage.

Explains how the unit automatically manages ice build-up for optimal efficiency in varying temperatures.

Provides advice on safe handling, cleaning, and draining the unit for storage or transport.

Troubleshooting steps for when the unit display does not light up, checking power and fuses.

Diagnosing why the unit collects no water despite indicators showing operation, checking container and settings.

Identifying causes for low water extraction, including filter blockage and placement near heat sources.

Addressing situations where the dehumidifier collects water but doesn't prevent condensation.

Troubleshooting the constant red light indicating a full container or float mechanism issues.

Diagnosing the flashing upper red light, often related to drain filter blockage.

Covers suitability for indoor use, power cord safety, and compliance with EMC/RFI directives.

Information required before contacting customer service for troubleshooting assistance.

Provides contact details for Ebac Limited for service and further information.

Details the physical address and contact numbers for Ebac Limited in the UK.

Guidance on disposing of electrical products in accordance with environmental regulations.