Product Profile
SEVERE DUTY CENTRIFUGAL SEPARATOR
MODEL # SDS SERIES SEPARATOR
PRODUCT FEATURES
THE EBBCO SDS CENTRIFUGAL SEPARATORS ARE DESIGNED TO REMOVE
SOLIDS FROM LIQUIDS. EACH MODEL IS SIZED BASED UPON THE FLOW
RATE.
UPON TANGENTIAL ENTRY, THE LIQUID AND SOLIDS ARE DRAWN
THROUGH INTERNAL SLOTS AND ACCELERATE INTO THE SEPARATION
CHAMBER. SOLIDS THAT ARE HEAVIER THAN THE CARRYING LIQUID ARE
SEPARATED AND ACCUMULATED IN THE COLLECTION CHAMBER. THE
SOLIDS ARE PERIODICALLY PURGED INTO A COLLECTION VESSEL. CLEAN
LIQUID IS DRAWN UP AND OUT OF THE SEPARATOR
• NO MOVING PARTS TO WEAR OUT.
• LOW PRESSURE LOSS.
• NO BACKFLUSHING.
• NO DOWNTIME REQUIREMENTS.
• NO SCREENS, CARTRIDGES, CONES, OR FILTER ELEMENTS TO CLEAN
OR REPLACE.
• FLOW RATES FROM 45-1200 GPM
PROVEN APPLICATIONS
• ABRASIVE WATERJET-GARNET REMOVAL.
• PARTS WASHERS.
• HEAT TREATMENT SYSTEMS.
• MACHINE TOOL COOLANT FILTRATION.
THIS IS A PROPRIETARY
DOCUMENT OF EBBCO, INC.
To Next Page
Loading...