EasyManua.ls Logo

EBENCH KH 2028 - Switching Off with Time Delay; Receive Mode

EBENCH KH 2028
29 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6. Receive Mode
As soon as the device is switched on as
described under 5., it is already in receive
mode.
a) Setting the Volume
Press the buttons Volume Control, to
adjust the volume.
b) Selecting the Reception Range (Band)
Select the desired reception range with
the sliding switch:
- FM = Ultra short wave
- AM = Medium Wave
- SW = Short Wave
- LW = Long Wave
c) Switching Off with Time Delay
If you would like to listen to the radio for
a while longer, for instance before falling
asleep, but would like the device to switch
off automatically after a certain amount of
time (10...90 minutes), ...
press the button RADIO ON / SLEEP
repeatedly until the desired number
of minutes is shown in the display
(“10 ... 90”).
The countdown begins immediately with
the first press of this button. If you do not
change the remaining time, the display will
switch back to the set frequency.
You can check the remaining time or reduce
it by pressing the ...
button RADIO ON / SLEEP again.
KH 2027 KH 2028
- 9 -
KH2027_2028_IB_UK_V6 20.02.2006 9:44 Uhr Seite 9

Related product manuals