AIRO 85 EN
12
www.eberg.eu
5. OPERATIONS INSTRUCTION
POWER
It is used to turn on / o the device.
TIMER
Setting the time for automatic shutdown of the device. It is possible in the range of 0.5-7.5h
MODE
Selecting fan operating mode out of: NORMAL, NATURAL and SLEEP.
• NORMAL: Constant fan speed according to user settings.
• NATURAL: Irregular variation in fan speed between high and low speeds. The user may feel
this as natural gusts of wind of varying strength and frequency.
• SLEEP: Operation in the lowest gear. The LED display will turn o a few seconds after
switching to SLEEP mode.
OSC
Enable / disable fan oscillation (rotation) function. Pressing it will initiate rotation of the device
around its axis to the right, then to the left. The swivel range is 70 °.
SPEED
Fan speed setting. It is possible to operate the fan at the following speeds: LOW / MEDIUM / HIGH
CONTROL PANEL
Timer - operating
time setting
Rotation function
(oscillation) ON/OFF
Speed Settings
Switch ON / Turn OFF
Mode selection:
• Normal
• Natural
• Sleep
To Next Page
Loading...
