Need help?Do you have a question about the Eberspächer EasyStart Pro and is the answer not in the manual?
General| Display Type | LCD |
|---|---|
| Control Type | Digital |
| Operating Voltage | 12V/24V |
| Temperature Range | -40°C to +85°C |
| Diagnostic Function | Yes |
| Operating Temperature | -40°C to +85°C |
| Connectivity | CAN bus |
| Heater Compatibility | Compatible with Eberspächer Airtronic and Hydronic heaters (specific models may vary, check compatibility list) |
| Timer Functions | Yes |
| Mounting | Dashboard or wall mounting |
Crucial safety and installation guidelines before commencing work.
Details on danger, caution, and warning symbols, plus text structure.
Defines intended use and provides information for special function installations.
Explains the manual's structure and purpose for users and service companies.
Highlights features like simple use, diagnostics, programmability, and no monthly fees.
Explains web browser-based control on various Wi-Fi devices without apps.
Describes fault code display, active/past faults, and reset functionality.
Details on setting up daily schedules with fifteen-minute to twelve-hour run times.
Lists operating voltage, dimensions, Wi-Fi frequencies, and temperature range.
Enumerates Eberspächer heater models compatible with the Wi-Fi control unit.
Guidance on controller and antenna placement for optimal performance.
Details included accessories like manual switch and external antenna.
Instructions for connecting the Wi-Fi control unit to various heater types.
Steps to connect to the Wi-Fi network and access the control interface.
Instructions for manually turning the heater on and off via the interface.
Accessing and interpreting fault codes, including reset functionality.
Programming daily heating schedules with start and heat times.
Setting cabin temperature preferences for the heating system.
Ensuring the correct time is set for accurate schedule operation.
Recommendation to change the default SSID for unit identification.
Configuring the duration for which the heater runs when manually activated.
Setting up a security password for the Wi-Fi device and recovery process.
To Next Page