Need help?Do you have a question about the EBIKELING LCD S830 and is the answer not in the manual?
General| Display Type | LCD |
|---|---|
| Model | S830 |
| Voltage | 24V/36V/48V/60V |
| Handlebar Size | 22.2mm |
| Waterproof Rating | IP65 |
| Current | Unspecified |
| Functions | Speed, Battery Level, Error Codes, Distance |
| Compatibility | Compatible with EBIKELING controllers |
Details on ABS casing and high hardness acrylic display material.
Physical dimensions and mounting specifications for the supporter and converter ring.
Compatibility with DC36v/48V electric systems.
Details on the female waterproof connector for connections.
Lists speed, power ratio, battery, errors, mileage, time, and light signals.
Covers power switch, inching control, and various operational settings.
Specifies UART as the communication protocol.
Describes the 1-second display reading at startup.
Explanation of light and battery level indicators on the display.
Defines ODO, TRIP, Time, VOL, CUR, and DST readings.
Details on the 5-lever pedal assist system.
Explains MAX/AVG speed and unit selection (MPH/KM/H).
Icons and descriptions for walk/push, powered ride, brake, and failures.
Indicators for real-time cruise, low battery, and controller failures.
Procedure to reset all parameters to original values.
Adjusting backlight brightness, mileage unit, and voltage class.
Configuring power gear, assist intensity, and drive modes.
Setting wheel diameter, magnet steel number, speed limit, and start mode.
Includes ODO zero-out and hibernation time settings.
Overview of button layout and basic key functions.
How to increase or decrease assist power levels.
Method to switch between different speed display types.
Enabling 6km/h cruise, real-time cruise, and controlling lights.
Procedures for exiting cruise mode and toggling backlight.
Instructions for turning the LCD panel on and off.
How to cycle through readings in the multi-function section.
Navigating and modifying customizable parameters.
Methods for saving changes and exiting the parameter setting menu.
To Next Page