EasyManua.ls Logo

Ebro TTX 110 - Replacing the Battery; Assembly of Battery; Changement de la Pile; 1 Placer la Pile

Ebro TTX 110
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
English Français
6.3 Changement de la pille
Quand le symbole de la pile s’affiche
sur le display (n°6sur l’illustration page
12), vous devez remplacer la pile.
6.3 Replacing the battery
The battery symbol on the display (Figure
6 on page 12) indicates that the battery
needs to be replaced.
Pour procéder au remplacement de la
pile, le thermomètre doit être ouvert.
The thermometer must be opened to
replace the battery.
Avoid any electrostatic discharging
during the battery replacement
process.
Evitez toute décharge électrostatique
pendant le changement de la pile !
6.3.1 Assembly of battery
Remove battery cover „1“on the
backside of the thermometer. for
example with a coin. Insert a new coin
cell „2“ type CR 2032 into battery
compartment and close it again.
Make sure that polarity is correct!
6.3.1 Placer la pile
Enlevez le couvercle du compartiment de
pile „1“ au dos du thermomètre.
Vous mettez une pile „2“ type CR 2032
dans le compartiment de pile.
Faites attention à la polarité!
Battery operational
Battery shortly exhausted
Battery needs to be replaced
Pile chargée
Pile sous peu épuisé
Changement de pile nécessaire

Related product manuals