Ebyte ME31-AAAX2240 - Page 32

Chengdu Ebyte Electronic Technology Co.,Ltd. ME31-AAAX2240_UserManul_EN
Copyright ©2012–2022,Chengdu Ebyte Electronic Technology Co.,Ltd 30
Read parameters: Before configuring parameters, you need to read the parameters once, otherwise it cannot be
configured;
Save parameters: save the parameters in the current input box;
Restart module: After clicking, the device restarts; Restore factory parameters:
Restore factory parameters immediately after clicking;
Step4: Configure the module baud rate if it is required, you need to read the parameters before configuration
Step 5: Configure Ethernet parameters if it is required, you need to read the parameters before configuration
Step6: Choose to configure basic parameters, you can configure the DO working mode of the device
Step7: Configure DO output mode（when configuration is required）