Need help?Do you have a question about the Ebyte E890-868LG12 and is the answer not in the manual?
Steps needed before powering up the LoRaWAN gateway and connecting devices.
Connecting Wi-Fi and LoRa antennas, powering up the device, and connecting to a PC.
How to access the gateway's web management interface using an IP address.
Lists hardware specifications like size, weight, operating temperature, and voltage.
Provides physical dimensions and a description of the hardware interfaces on the device.
Overview of the web management interface menu structure for setting functions and viewing status.
Explains how to view the gateway's current status, including firewall and network information.
Covers system settings, hostnames, passwords, resets, and reboots.
Explains how to use Frp for remote management of the gateway through the public network.
How to configure settings for LAN and WAN ports, including IP addresses and DHCP.
How to set wireless parameters like password, operating mode, and MAC filtering.
How to combine network ports, enable/disable ports, and configure VLANs.
How to assign IP addresses and host identifiers to DHCP clients using MAC addresses.
How to implement custom domain name resolution and map hostnames to IP addresses.
How to configure LoRaWAN frequency bands based on regional parameters and channel plans.
How to set up LoRaWAN gateway parameters like Gateway ID, server address, and ports.
How to view LoRaWAN status, including message rates, channel usage, RSSI, and SNR.
Description of the LED indicators on the equipment panel and their meanings.
Description of the physical buttons on the panel and their functions, like restore.
Description of other markings found on the equipment panel.
To Next Page
General
